Sep 30, 2020 TCP/IP computer networks use both the IP addresses and MAC addresses of connected client devices. While the IP address changes over time, the MAC address of a network adapter always stays the same. There are several reasons you might want to know the MAC address of a remote computer, and it's easy to do by using a command line utility such as. Jun 23, 2016 Click OK and your computer will now have a static IP address assigned to it. Assign Static IP Address – Mac (OS X) If you’re using a Mac, you have to go to System Preferences, which is basically the equivalent of Control Panel in Windows. To get there, click on the Apple icon at the top left of the menu bar.
To set up the IP address, take the following steps:
Using Server Manager
Step 1 : Open Server Manager from the Start menu. And select Local Server.
Step 2 : In the Properties section, click the highlighted Ethernet setting.
Step 3 : In the Network Connections window, right-click your server’s Ethernet and select Properties.
Step 4 : In the Ethernet Properties window, select Internet Protocol Version 4 (TCP/IPv4), and click the Properties button.
Step 5 : In the Internet Protocol Version 4 (TCP/IPv4) Properties window, select the Use the following IP address: option and enter the IP address, Subnet mask, and Default gateway fields. Additionally, select the Use the following DNS server addresses: option and fill in the Preferred DNS server and Alternate DNS server fields. Click OK to close.
Click the Close button to close the Ethernet Properties window.
Using Server Configuration
Step 1 : Type Sconfig.cmd, and then press ENTER. The Server Configuration tool interface opens.
Step 2 : Enter 8 as a selected option and press Enter.
Step 3 : Enter the number of the network adapter that you want to set up the IP address for and press Enter.
Step 4 : Enter 1 in the sub-menu to set the network adapter address and press Enter.
Static Ip For Mac Os
Step 5 : Enter S for the static IP address and press Enter.
Step 6 : Enter the static IP address and press Enter.
Step 7 : Enter the subnet mask and press Enter.
Step 8 : Enter the default gateway and press Enter.
Step 9 : Enter 2 in the sub-menu to set the DNS servers and press Enter.
Step 10 : Enter the new preferred DNS server and press Enter.
Step 11 : In the Network Settings dialog box, click OK to close it.
Step 12 : Enter the alternate DNS server and press Enter.
Step 13 : Enter 4 in the sub-menu to exit and Return to Main Menu:
When the device is configured as a DHCP server or for DHCP relay, you can bind static IP addresses to up to 100 network devices, such as a web server or an FTP server. Binding does not assign an IP address to a device. You should ensure that each device bound to a static IP address in the IP & MAC binding table is configured to use a static IP address.
Typically the MAC address of a device physically appears on a label on the bottom panel or back panel of a device.
Bind IP Addresses by Discovery
To bind known IP addresses to MAC addresses and name the binding:
- Click Show Unknown MAC Addresses. The IP & MAC Binding Table appears. If the web browser displays a message about the pop-up window, allow the blocked content.
- Enter a descriptive Name.
- Check the Enable box. Alternatively, select all devices in the list by clicking the check box at the top of the Enable column.
- Click Save to add the devices to the Static IP list, or click Close to close the pop- up window without adding the selected devices.
The devices are listed by the IP address and the MAC address. If needed, click Refresh to update the data.
Bind IP Addresses Manually
To add a new binding to the list, click Add and enter the following information:
- Static IP Address—Static IP address. You can enter 0.0.0.0 if you want the router to assign a static IP address to this device.
- MAC Address—MAC address of the device. Enter the address without punctuation.
- Name—Descriptive name for the device.
- Enable—Check this box to bind the static IP address to this device.
Edit or Delete Bound Entries
To Edit the settings, select an entry in the list and click Edit. The information appears in the text fields. Make the changes, and click Save.
To Delete an entry from the list, select the entry to delete, and click Delete. To select a block of entries, click the first entry, hold down the Shift key, and click the final entry in the block. To select individual entries, press the Ctrl key while clicking each entry. To de-select an entry, press the Ctrl key while clicking the entry.
Using the Static IP List to Block Devices
Get A Static Ip Address Free
The Static IP list can be used to control access to your network.
To block access by devices that are not on the list or do not have the correct IP address:
- Block MAC address on the list with wrong IP address—Check this box to prevent a device from accessing your network if its IP address has been changed. For example, if you assigned a static IP address of 192.168.1.100 and someone configures the device to use 192.168.149, the device is not allowed to connect to your network. This discourages users from changing their device IP addresses without your permission. Uncheck the box to allow access regardless of the current IP address assignment.
- Block MAC address not on the list—Check this box to block access from devices that are not included in the Static IP list. This prevents unknown devices from accessing your network. Uncheck the box to allow access by any device that is configured with an IP address in the correct range.